The application range of the wire brush

Wire brush is a type of wire for different uses to choose the corresponding type of wire, choose different wire diameter brush, wire has straight wire and ripple wire two kinds, the weight of the wire can be based on different needs. The following wire wheel brush, twisted wire wire wheel brush and curved wire wire wheel brush manufacturers to talk about the application range of wire brush.

Wire brushes, especially wire brush rollers, are generally used in steel or aluminum exterior treatment plants, and are installed by a series of stainless steel brush rollers on a brush polishing machine (brushing machine) that operates at full automatic high speed. The wire brush roller rotates at high speed in the upper and lower exterior of the strip in the opposite direction to the rolling part movement to peel off the iron oxide. The brushed iron oxide is washed away by a closed-cycle cooling water flushing system. The thickness of the general coil wire is 1.09-6.35mm, and the renewal cycle of the wire brush is updated once for every 20,000t sheet or 40,000t steel roll produced.

Stainless steel ultra-fine elastic wire brush is dedicated to cleaning ceramic mesh rollers, because the hardness of ceramics is much higher than the hardness of steel wire, wire brush will not damage the mesh roller surface ceramic layer. Ultra-fine elastic copper wire brush is used to clean chrome-plated metal mesh rollers, graved plate rollers of the common necessary cleaning tools, with the use of cleaning agents better results.

Common standard 6 x 14 or 5 x 14 holes, wire material 304 stainless steel wire or ordinary wire can be. Each hole is usually implanted with five half roots, and the wire extends at about 20mm. Brushes made of ordinary steel wire are simple rusty and unavailable, which is too different from the quality of wood-handled wire brushes made of 304 stainless steel wire.

Wire pipe brush is generally used for industrial pipes, mechanical screw hole cleaning rust removal, polishing cleaning effect, pipe brushing process using wire or stainless steel wire clamped in two or four wire center with mechanical twisting.

Leave a Comment